My spark was flying pretty well at low altitude and I decided to go little high but suddenly my drone was stuck at height of 30m. It was not gaining altitude after giving of full throttle command also. I tried to celebrate all sensors properly.
I factory reset it aslo and as well I downgrade my firmware to.
But drone was continuously struggling at height of 30m.
But after that I blind my drone bottom camera sensors by black sticky tape.
Walla, now it crossed the height of 30m.
But the final problem came when the drone is gaining it's altitude automatically without any throttle inputs.
So is there are any chances that drone is not able to judge ground level and started gaining it's altitude automatically. ?
I factory reset it aslo and as well I downgrade my firmware to.
But drone was continuously struggling at height of 30m.
But after that I blind my drone bottom camera sensors by black sticky tape.
Walla, now it crossed the height of 30m.
But the final problem came when the drone is gaining it's altitude automatically without any throttle inputs.
So is there are any chances that drone is not able to judge ground level and started gaining it's altitude automatically. ?