I've just bought Litichi and have been experimenting with Follow and Track
First of all with Track I don't see any way of marking the subject. I enter track, there is a configuration cog but nothing else.
With Follow I've had a few issues. On 3 out of the 4 attempts the drone loops around the controller in a rather erratic fashion even when stationary. I have 3 meters shown as the GPS accuracy and 13 satellites in view. After the first two tries I recalibrated the compass. The next attempts, it followed as expected but the fourth attempt was back to some erratic following. I also get the gimbal nodding up and down.
It would appear that Litchi must be giving erratic location data to the aircraft in this case.
Anyone any ideas?
First of all with Track I don't see any way of marking the subject. I enter track, there is a configuration cog but nothing else.
With Follow I've had a few issues. On 3 out of the 4 attempts the drone loops around the controller in a rather erratic fashion even when stationary. I have 3 meters shown as the GPS accuracy and 13 satellites in view. After the first two tries I recalibrated the compass. The next attempts, it followed as expected but the fourth attempt was back to some erratic following. I also get the gimbal nodding up and down.
It would appear that Litchi must be giving erratic location data to the aircraft in this case.
Anyone any ideas?