iPhone vs iPad

[koffe]

Have purchased an iPad to get bigger/better view when flying my Spark with the Autopilot app. Earlier I have not had any problems with an old iPhone 6+ but now with the new iPad 9.7 the Spark stops and hovers (as programmed) when a mission is finished, but does not react to any manual commands from the RC. I disengage and try to fly back for landing, but absolutely nothing happens!!?! Only chance to get it back is to initiate an RTH on the RC.

Any ideas?

 

[Andre Levite]

It's a software bug. Litchi has had same issue every few updates. The more people that report this the sooner a fix will happen.

Hopefully next update will address this

 

[koffe]

I found the solution and write it here to help if anyone elde experience the same later on.

On the iPhone I had programmed C2 button to disengage. Have forgot to do that on the iPad, so Autopilot was not disengaged when I thought so. And therefore no inputs on the RC did work.

Now it works fine as wanted.

Skickat från min BLA-L29 via Tapatalk