I've seen a few posts for this in the past. Is anyone having trouble using sports mode when they have either an Android or a iPhone 5 or earlier attached to their controller?
Sport mode works fine on my Samsung S5 (root/LineageOs). Maybe root your phone, back it up, and change the OS to LineageOs to see if that's able to give you better results.Thanks RPL. I'm not using the iPhone 5. I posted because I've seen several queries on different forums about it. The 5 is the oldest generation where you can get DJI GO 4 ( specifically iPhone 5se). The problem is more Android. I use a Galaxy S7 and everything is fine apart from Sport mode. Doesn't matter whether using a cable or WiFi it doesn't go into sports mode. All settings have been checked and having tested with both systems I have found that the screens in DJI are different depending what system you use. You have different options available strangely. I'm not too fussed because it probably delays the amount of time before I crash it but would be great to have all options available.
Callibrate the rc maybe? Does the Spark fly well for the rest?Disconnected and reconnected. Same result. When everything is synced and it's good to fly I switch to sport and it comes up saying " Intelligent flight mode is not enabled. Go to Main controller settings" But when I go to the MC settings there is no option there to enable/ disable etc
I'm not near my drones right now, but I think that the setting for enabling multiple modes, is in advanced settings of the drone icon.Disconnected and reconnected. Same result. When everything is synced and it's good to fly I switch to sport and it comes up saying " Intelligent flight mode is not enabled. Go to Main controller settings" But when I go to the MC settings there is no option there to enable/ disable etc
Disconnected and reconnected. Same result. When everything is synced and it's good to fly I switch to sport and it comes up saying " Intelligent flight mode is not enabled. Go to Main controller settings" But when I go to the MC settings there is no option there to enable/ disable etc