Tap to activate you new spark....

[Chezdale]

Hello all,
I have a Spark and a Mavic Air. Problem is EVERY time I go to fly my spark (which I do more than the Mavic) I get three boxes when activating the DJI go app.
The top one always says “tap to activate your new spark”. It then wants me to scan the box qr code - each time?
I waste quite a few minutes setting things up before flying and it’s quite frustrating. I bought the Spark flymore package with remote.
This issue doesn’t happen with the Mavic and all connects quickly.
Any idea’s??

 

[Radman]

I get that screen when I forget to connect my tablet to the Spark RC in the settings menu on my tablet (settings>Wi-Fi>spark-RC-66bd; then close settings and open DJI Go 4 app).

 

[Chezdale]

I get that screen when I forget to connect my tablet to the Spark RC in the settings menu on my tablet (settings>Wi-Fi>spark-RC-66bd; then close settings and open DJI Go 4 app).

Yes. That sequence definitely makes it easier.
Thanks.

 

[Bob Hospadaruk]

I get that screen when I forget to connect my tablet to the Spark RC in the settings menu on my tablet (settings>Wi-Fi>spark-RC-66bd; then close settings and open DJI Go 4 app).

Do you have to connect the RC by Wi-Fi if you are going to use an OTG cable?

 

[msinger]

Do you have to connect the RC by Wi-Fi if you are going to use an OTG cable?

No.

 

[Rafa7]

Do you have to connect the RC by Wi-Fi if you are going to use an OTG cable?

No, no need for WIFI. Is either WIFI or OTG cable, if using the OTG cable and I would disable WIFI on the phone/table.