Help fixing my spark!!

[Ben saida]

what screw driver works with the star head screws on the motor cover?




Also, i have the same issue that this guy had: Stiff/thight motor after crash and HOW i solve it.



Can anyone help me on what part he hammered down?

 

[msinger]

T6 Torx

 

[Ben saida]

T6 Torx

Hey, thanks. I have the same issue as this guy: Stiff/thight motor after crash and HOW i solve it.


Im confused on what he had to use the hammer for. What part did he hammer?

 

[msinger]

What part did he hammer?

No idea. Maybe wait for the OP to reply in that thread.

 

[Ben saida]

T6 Torx

Also, will this work?https://www.amazon.com/dp/B072KWVVM9/ref=cm_sw_r_cp_api_a16ZAbS2VKCJ7

 

[msinger]

Yes, that screwdriver will work too. The only difference is that it has a hole in the middle so it can also remove security screws found in some electronic devices.

 

[Ben saida]

Yes, that screwdriver will work too. The only difference is that it has a hole in the middle so it can also remove security screws found in some electronic devices.

Thanks!

 

[Ben saida]

Updated thread, please check the post, if anyone knows what he hammered in, that would be massively helpful

 

[Ben saida]

Yes, that screwdriver will work too. The only difference is that it has a hole in the middle so it can also remove security screws found in some electronic devices.

@msinger hey, what screwdriver do i need to unscrew this?

 

[friedgoldmole]

Updated thread, please check the post, if anyone knows what he hammered in, that would be massively helpful

He hammered in the motors shaft that had protruded out the bottom of the motor

 

[DRONEOG007]

what screw driver works with the star head screws on the motor cover?


It's a 1.5 or a T6 bit

Also, i have the same issue that this guy had: Stiff/thight motor after crash and HOW i solve it.



Can anyone help me on what part he hammered down?

 

[ratometro]

I have this set: 34 Pc Multi-Bit Precision Screwdriver Set, it works perfect.

 

[msinger]

@msinger hey, what screwdriver do i need to unscrew this?

You need a Phillips screwdriver.

If you pick up a toolkit like this Boxer toolkit, you'll have all of the tools you need to make this repair.

 

[Ben saida]

Thanks for the help guys! I ordered a toolkit coming today, and im gonna unscrew it and hammer the shaft back.